I think there's a solid case for someone to make a monitor with a working, built-in dock. I mean, many monitors already have USB-outs for keyboards and 2nd displays and such.
I think monitors are a sweet spot - they tend to stick around longer than computers, and docks really don't need to change a lot over time, at least now with thunderbolt out there. Fewer cables, too.
I like the idea of standalone docks, and I purchased a few, but none reliably worked for me.
I use a bunch of Lenovo Thunderbolt docks, with both Macbooks and Thinkpads. The older models go for as little as $20 used nowadays. I had to update the firmware on the really old ones, but after that they work flawlessly and let me connect 2x4k60 monitors.
Thunderbolt/USB-C protocols are basically at the edge of what's electrically possible. If you look at Ethernet equipment that's roughly in the same speed range and notice how much it costs, it's clear there are heavy tradeoffs with the consumer stuff.
My experience with non-Apple Thunderbolt products has been pretty dicey across the board. My ASUS motherboard has a port and theoretically works with it but across several firmware, BIOS, and driver upgrades, I’ve never actually got it to successfully recognize my TS4 as a Thunderbolt device, only USB.
I use two different docks. Dock 1 is a cheap chinese dock with some ports that worked (it has many ports). Dock 2 is hp g2 (an expensive dock). Occasionally the screen shuts off and resumes a second later in the dock 1. And resuming from sleep, the laptop doesn’t detect the keyboard. I figured it was until the laptop is fully up, I should not plug in the usb. On dock 2, the laptop goes to sleep and won’t turn back on from the keyboard until I press the power button.
I had the first generation Anker TB2 doc and that was the first time I ever saw them produce a product that was a dud.
They sent me a replacement and I had the same problems. Then found out it was a design problem not a manufacturing one. They could send me 10 more and they would still not wake up all the ports properly. I don't even recall now what series of ritual steps I took to wake it up. I think unplugging it completely from everything. Which is actually more cable wear than not having a dock.
Please take this gently, but I did not really walk away from this post having gained anything. I don't have any problems with the post in isolation but I just don't feel it really offers enough weight to be here if that makes sense.
I read a few of your other posts and your writing style is direct and pleasant in a way I appreciate. Thank you for actually writing things.
The author does not call it out, but I think the point is that it's not only the dock. I've been struggling with MBP wakeup issues for a while. We have a whole zoo of various apple devices attached to a number of docks. All of the monitors are Odyssey Neo G9. TL:DR an issue with MBP port, MBP to Dock link, Dock, Dock to Monitor link, or the monitor itself could cause the unplugging dance.
In addition, it takes some time for Apple to squash bugs after releasing new hardware or software. M5s used to be unreliable with Anker TB4 until 1-2 months ago.
Us old people have the idea of peripherals as input (keyboard, mouse) or output (monitor, printer) - but they've all been input/output for two decades or more; and Thunderbolt and friends are much more like an Ethernet network (reliability of Wake on LAN, anyone?) than they are simple point-to-point connections.
Meaning - anything could be the device preventing what you expect to happen, even if it looks like it should be impossible and have nothing to do with it.
> I did not really walk away from this post having gained anything
Then my comment won't help you much: since I swapped my MacBook Air M1's 27" monitor for a 34" one from the same brand, it's only been the exact clusterfuck of unreliable "wake up not working properly anymore" for no friggin' reason. Except in my case it was working fine, and now it's not anymore.
I think there's a solid case for someone to make a monitor with a working, built-in dock. I mean, many monitors already have USB-outs for keyboards and 2nd displays and such.
I think monitors are a sweet spot - they tend to stick around longer than computers, and docks really don't need to change a lot over time, at least now with thunderbolt out there. Fewer cables, too.
I like the idea of standalone docks, and I purchased a few, but none reliably worked for me.
I use a bunch of Lenovo Thunderbolt docks, with both Macbooks and Thinkpads. The older models go for as little as $20 used nowadays. I had to update the firmware on the really old ones, but after that they work flawlessly and let me connect 2x4k60 monitors.
Thunderbolt/USB-C protocols are basically at the edge of what's electrically possible. If you look at Ethernet equipment that's roughly in the same speed range and notice how much it costs, it's clear there are heavy tradeoffs with the consumer stuff.
My experience with non-Apple Thunderbolt products has been pretty dicey across the board. My ASUS motherboard has a port and theoretically works with it but across several firmware, BIOS, and driver upgrades, I’ve never actually got it to successfully recognize my TS4 as a Thunderbolt device, only USB.
I use two different docks. Dock 1 is a cheap chinese dock with some ports that worked (it has many ports). Dock 2 is hp g2 (an expensive dock). Occasionally the screen shuts off and resumes a second later in the dock 1. And resuming from sleep, the laptop doesn’t detect the keyboard. I figured it was until the laptop is fully up, I should not plug in the usb. On dock 2, the laptop goes to sleep and won’t turn back on from the keyboard until I press the power button.
Never thought it could be the monitor. I have an HP dock with an HP laptop for work and it's totally unreliable waking from sleep.
My chances of getting new monitors are slim in this climate but it's a new avenue of investigation at least.
Yeah and the author linked a $1100 monitor lmao
My OWC Thunderbolt Pro dock is still the most feature packed one with 10g and good heat dissipation
I had the first generation Anker TB2 doc and that was the first time I ever saw them produce a product that was a dud.
They sent me a replacement and I had the same problems. Then found out it was a design problem not a manufacturing one. They could send me 10 more and they would still not wake up all the ports properly. I don't even recall now what series of ritual steps I took to wake it up. I think unplugging it completely from everything. Which is actually more cable wear than not having a dock.
Please take this gently, but I did not really walk away from this post having gained anything. I don't have any problems with the post in isolation but I just don't feel it really offers enough weight to be here if that makes sense.
I read a few of your other posts and your writing style is direct and pleasant in a way I appreciate. Thank you for actually writing things.
OP is not the author.
Fabien Sanglard's HN handle is fabiensanglard
The author does not call it out, but I think the point is that it's not only the dock. I've been struggling with MBP wakeup issues for a while. We have a whole zoo of various apple devices attached to a number of docks. All of the monitors are Odyssey Neo G9. TL:DR an issue with MBP port, MBP to Dock link, Dock, Dock to Monitor link, or the monitor itself could cause the unplugging dance.
In addition, it takes some time for Apple to squash bugs after releasing new hardware or software. M5s used to be unreliable with Anker TB4 until 1-2 months ago.
Us old people have the idea of peripherals as input (keyboard, mouse) or output (monitor, printer) - but they've all been input/output for two decades or more; and Thunderbolt and friends are much more like an Ethernet network (reliability of Wake on LAN, anyone?) than they are simple point-to-point connections.
Meaning - anything could be the device preventing what you expect to happen, even if it looks like it should be impossible and have nothing to do with it.
I’m hoping the comments will have a better insight into what’s happening
> I did not really walk away from this post having gained anything
Then my comment won't help you much: since I swapped my MacBook Air M1's 27" monitor for a 34" one from the same brand, it's only been the exact clusterfuck of unreliable "wake up not working properly anymore" for no friggin' reason. Except in my case it was working fine, and now it's not anymore.
Switching the monitor worked. Wonder if an HDMI dummy plug, a virtual monitor emulator, would have helped.
Anyone know what that keyboard is?
I think it's the 8BitDo Retro Mechanical Keyboard [1] with the "M edition" keycaps.
[1]: https://www.8bitdo.com/retro-mechanical-keyboard-m/
> ASUS ROG Swift (PG27UCDM)
any benefits in coding and reading hackernews